Mini Split Installation in Lovelock, NV
A new system here will heat from October through May and cool from June through August every year. Tell us about the house, and a licensed contractor who covers Pershing County will get in touch.
Tell us about the job
It takes about a minute.
Eleven months of work for a mini-split in Lovelock
Winter nights here average 23°F from December through February, and a mini-split has to keep pulling heat out of that cold air the whole season. Summer afternoons average 88°F, so the same unit switches to cooling not long after. Between the two, homes in Lovelock need heat or cooling 11 months out of the year. There is barely a month when the system gets to sit idle.
Any mini-split installed new has to meet the federal minimum for a split-system heat pump, 14.3 SEER2 for cooling and 7.5 HSPF2 for heating. With this many months of run time, sizing it right for both the cold nights and the hot afternoons matters as much as meeting that number.
- 8 months
- October through May, your system heats
- 3 months
- June through August, it cools
- 23°F
- the average winter night it heats against
- 88°F
- the average summer afternoon it cools against
NOAA nClimDiv, 1991–2020 normals
Nevada requires HVAC contractors to hold a state license.
The Nevada State Contractors Board tests contractors before it licenses them, then keeps that license tied to the contractor rather than to any one job. So the license you're checking is the company's, not a piece of paper issued just for your installation.
That license covers who is allowed to do the work in Pershing County. In most cities and counties, an installation like this also needs a permit from the local building office, with an inspection once the work is done, and that inspection is what confirms the lines, the wiring and the mounting were done right.
Sources: Nevada Legislature · Nevada State Contractors Board
- Is a mini split worth it?
- For most homes here, yes, especially if you're heating a room or addition that isn't on your main system. A mini split runs eight months of the year for heat and three for cooling here, so it earns its keep most of the year. It also gives you a backup source of heat and cooling for a specific room if your main system ever goes down. Whether it's the right call for your house depends on what you're trying to heat or cool and what you already have, so a contractor should look at the space before you decide.
- How many rooms can a mini split cover?
- A single indoor unit is built for one room or one open space. If you need to cover several rooms, you install a multi-zone system, which runs more than one indoor unit off a single outdoor unit, with each indoor unit controlling its own room. Most residential outdoor units support somewhere between two and eight indoor heads. How many rooms you can cover comes down to the size of each room and the capacity of the outdoor unit, so a contractor needs to measure the space before sizing the system.
- Can a mini split heat a whole house?
- It can, if it's sized and placed for that job, but a single indoor unit heating one room will not heat the rest of the house. A whole-house mini split setup uses multiple indoor units, one for each room or zone, tied to an outdoor unit sized for the whole load. Winter nights here average 23°F, so the outdoor unit and each indoor head need to be sized for that cold, not just for a mild day. A contractor can walk through the house and tell you what it would take to cover it room by room.